SYSTEM 06.01 · HYDROPONIC CONFIGURATION
NFT gutter line and bench frame, fabricated to the layout.
Reference support package for a leafy-green house: bench frame, NFT channel support at a set slope, return gutter line.
Single-span tunnel, roll-up ventsProject photo
This package is small and precise: a bench grid on adjustable feet, channel supports set to a slope, and a return gutter. It is quoted from the system supplier's layout, not from ours, because the slope and the channel spacing belong to the growing system.
| Item | Section | Function |
|---|---|---|
| Bench leg | SHS 40×40×1.5 | adjustable foot |
| Bench rail | C 80×40×1.8 | carries channels |
| Channel support | SHS 25×25×1.5 | at supplier's spacing |
| Return gutter | G 200 | catch and return |
| Bracing | Ø33.5×1.8 | grid square |
Level tolerance ±2 mm per 2 m on bench rails; slope per the system supplier.
NFT support — order specificationXY-NFT-01
- Bench grid
- per layout
- Slope
- 0.5–1.0 %
- Level tolerance
- ±2 mm / 2 m
- Coating
- hot-dip at wet interfaces
- Feet
- adjustable, ±20 mm
- Fabrication
- cut and punched to layout
- Wet interface
- hot-dip
- Touch-in
- zinc-rich paint
- Packing
- by grid
- Loading
- LCL / 20GP
Indicative values — the quotation and mill certificate carry the final figures.Rev. 2026-11
NEXT
Read next
Pages that answer the question this page raises.
- 05.06Hydroponic & gutter systemsHydroponic greenhouse steel: NFT support frames, benches, gutter lines, galvanised and lev→
- 06.05Leafy greens & lettuceLeafy green and lettuce greenhouse structure: low houses, wide spans, benches, NFT support→
- 04.05Roll-formed guttersRoll-formed steel gutters for greenhouses: 200/250/300 mm profiles, Z275 pre-galvanised, e→
PRICE THE SUPPORT GRID
Quote the bench and NFT support
Send the layout with channel spacing and slope. We return a fabricated grid with level tolerance stated.