PRODUCTS 00 · INDEX
Seven product families. Every line on the quotation is one of them.
A greenhouse frame is a bill of materials before it is a structure. These are the lines we manufacture, cut, coat and pack: four tube geometries, two cold-formed profile types, roll-formed gutters, and the fittings that turn them into a house.
Buyers usually arrive with one of two documents: a drawing from their house designer, or a list of sections copied from a previous order. Either is enough. What we need in addition is the coating class, the quantity, and whether lengths must be 6 m, 12 m or cut to a specific bay.
Round steel tube
Ø21.3–114.3 mm, 9 sizes. Posts, bracing, wire frames, door frames.
9 size pagesRound steel tubeOval arch tube
30×60 to 50×100 mm. The arch and truss section of most film houses.
5 size pagesOval arch tubeSquare & rectangular
SHS/RHS 20–50 mm. Columns, chords, rails, flat fixing faces.
5 size pagesSquare & rectangularC / Z cold-formed profiles
Purlins, side rails and posts, punched to pattern.
4 profilesC / Z cold-formed profilesFittings & connectors
Clamps, brackets, anchors, vent hardware, door sets.
8 groupsFittings & connectorsFilm, net & accessories
150–200 micron film, shade and insect net, tape, clips.
4 groupsFilm, net & accessoriesHow to read a product page
Every size page carries the same four blocks: a dimension and weight table with calculated nominal weights, the jobs that section is usually bought for, the fittings it pairs with, and the packing note for export. Nothing on those pages is a catalogue promise — the mill certificate for your heat is the binding figure.
| Group | Sits where | Decides |
|---|---|---|
| Tube (round / oval) | Arches, trusses, posts, bracing | Span, snow deflection, crop volume |
| SHS / RHS | Columns, door frames, truss chords | Point loads, flat fixing faces |
| C / Z profiles | Purlins, side rails, light posts | Cover fixing, wind uplift |
| Gutter + fittings | Eaves line, joints, covering | Rainwater, airtightness, assembly speed |
Section selection belongs to your structural engineer. We quote what is specified and flag when a section looks light for the stated load.
Read next
Pages that answer the question this page raises.
- 05System typesGreenhouse system types: multi-span film, single-span tunnel, Venlo glass, sawtooth polyca→
- 08.01Specify a frameHow to specify a greenhouse frame: span, bay, eaves, load case, covering, coating, fitting→
- 08.09Container loadingGreenhouse frame container loading: 20GP and 40HQ internal dimensions, 6 m and 12 m tube, →
- 09.04Quality controlGreenhouse frame quality control: incoming coil, dimensional checks, coating inspection, b→
NEXT STEP
Price this against your take-off
Send the sizes, wall thicknesses and quantities you need. We reply with a line-by-line offer, bundle weights and the loading plan for your container.