Mill direct · Tianjin, China · EN 10219 tube · ISO 1461 galvanising on request Seller of record: XinYonSen +86 150 2264 1456 2268199197@qq.com
Steel frame millTianjin, China · mill direct
RFQ

COMPANY 01 · ABOUT

We make the steel that greenhouse frames are built from, and we say where our expertise stops.

A tube mill and profile line in Tianjin's Daqiuzhuang steel cluster, supplying greenhouse frames and frame material to growers, contractors and house suppliers. We are not a turnkey greenhouse company and we do not pretend to be.

Multi-span film house, exterior — XinYonSen
Multi-span film house, exteriorProject photo

What we actually do

  • Roll and cut steel tube from Ø6 to 1,200 mm, wall 0.5 to 16 mm, single lengths up to 16 m.
  • Form C and Z profiles and gutters for roofs and drainage.
  • Bend arches to a radius, punch to a pattern, and weld where a joint needs to be a joint.
  • Assemble frame packages: cut, bent, punched, bundled and marked for a specific house.
  • Quote, document and export, with the mill and coating certificates that go with the steel.

What we do not do

  • We do not design structures or issue design certificates.
  • We do not supply glass, glazing systems, climate control, irrigation or growing systems.
  • We do not install. We supply drawings, a sequence and support.
  • We do not claim a certificate we do not hold, and we do not describe a lapsed certificate as current.

Why the “what we do not do” list is on the about page

Because the alternative is a buyer finding out at the port. A supplier whose scope is clear is easier to buy from, even when the scope is narrower.

Where we sit in the chain

The chain, and which link is ours
LinkWhoOurs?
Steel mill / coilUpstream millNo — we buy coil
Tube and profile formingPufengYes
GalvanisingAccredited galvaniserManaged by us
Frame fabricationPufengYes
Structural designYour engineerNo
House assemblyYour contractorNo
Export and documentsXinYonSenYes

Location

Daqiuzhuang, Jinghai District, Tianjin — a steel tube cluster with coil, forming, galvanising and port access within a short distance. That is the practical reason a frame can be quoted, cut, dipped and loaded inside four weeks.

Open selection list

NEXT STEP

Verify us before you commit

Ask for the mill certificates, the packing photos or a video call on the line. We would rather answer those questions now than after the deposit.

Review & send