Mill direct · Tianjin, China · EN 10219 tube · ISO 1461 galvanising on request Seller of record: XinYonSen +86 150 2264 1456 2268199197@qq.com
Steel frame millTianjin, China · mill direct
RFQ

SYSTEM 05.01 · HIGH TUNNEL CONFIGURATION

HT-420: 4.2 m high tunnel, 2.4 m at the bow.

Reference high tunnel for market gardens and season extension. Width 4.2 m, bow Ø33.5×1.8, roll-up sides, ground-screw anchors.

Arched tunnel seen through the film — XinYonSen
Arched tunnel seen through the filmProject photo

HT-420 is the simplest frame we quote, and the one where the details matter most. At 4.2 m wide there is no gutter and no post line: every load goes through the bow and its anchor. That is why we quote anchors as a line item rather than an accessory.

HT-420 — reference schedule
MemberSectionSpacingNote
BowØ33.5×1.81.0–1.5 mbent to radius
Longitudinal braceØ33.5×1.8mid-heightone per side minimum
Roll-up sideØ33.5 + ratchetper sidefilm + channel
Anchorground screw 600 mmeach legor concrete
End bowØ48.3×2.0each enddoor frame

Reference only. Wind exposure decides brace count and anchor length.

HT-420 — dimensionsXY-HT-420
Width
4.2 m
Height
2.4 m
Bow
Ø33.5×1.8
Bow spacing
1.0–1.5 m
Sides
roll-up
Anchors
ground screw
Run
per project
Bows per 30 m
20–30
Cover
film or shade net
Loading
40HQ
Indicative values — the quotation and mill certificate carry the final figures.Rev. 2026-11
Open selection list

The cheapest upgrade

A second longitudinal brace and longer anchors cost a fraction of a new frame and add more storm capacity than a heavier bow. Ask for both in the first quotation.

PRICE THIS HIGH TUNNEL

Quote HT-420 bows, braces and anchors

Send the run length and wind figure. We quote the anchor and brace quantities the exposure needs, not the minimum.

Review & send