PRODUCT 03.03 · SHS
Square tube 30×30 mm — columns, equipment supports, rails.
30×30 mm square hollow section, wall 1.2–3.0 mm, cut, punched and welded to drawing. The smallest size we would quote as a column on a real house.
Mixed sections, mill hallTianjin mill
The 30×30 SHS is chosen for its corner stiffness and its flat faces. If the member is a column, check the base detail at the same time: a square post on a flat base plate with four bolts behaves very differently from the same post driven into soil.
| Wall | kg/m | 6 m length (kg) | 12 m length (kg) |
|---|---|---|---|
| 1.5 mm | 1.34 | 8.1 | 16.1 |
| 2.0 mm | 1.76 | 10.6 | 21.1 |
| 2.5 mm | 2.16 | 13.0 | 25.9 |
| 3.0 mm | 2.54 | 15.3 | 30.5 |
4 × (side − wall) × wall × 0.00785, nominal before corner-radius correction.
30×30 SHS — order specificationXY-SQ-30
- Section
- 30 × 30 mm
- Wall
- 1.5 / 2.0 / 2.5 / 3.0 mm
- Length
- 6 m / 12 m / cut to order
- Grade
- Q235B · Q355B
- Standard
- EN 10219
- Coating
- Z275 / hot-dip ISO 1461
- Fabrication
- punched / welded / mitred
- Packing
- square bundle
- Typical use
- columns, equipment supports, rails
- Corner radius
- 1.5–2.5 t
- Cut tolerance
- ±1 mm
- Loading
- 40HQ
Indicative values — the quotation and mill certificate carry the final figures.Rev. 2026-11
Pair it with
NEXT
Read next
Pages that answer the question this page raises.
- 04.03Square & rectangular tubeSquare and rectangular hollow sections for greenhouse frames: 20×20 to 50×50 mm, wall 1.2–→
- 04.06.03Anchors & base platesAnchors & base plates for greenhouse frames — ground screws, concrete-in anchors, base pla→
- 08.05Galvanising methodsPre-galvanised (Z275) versus hot-dip galvanising for greenhouse frames: process, protectio→
PRICE THIS SECTION
Quote 30×30 SHS for your frame
Send lengths, wall, and whether the pieces are punched or welded. Fabrication is quoted per piece, not per metre.