PRODUCT 06.05 · FITTINGS
Vent & roll-up hardware — ventilation decides the climate inside.
Roll-up tubes, ratchets, gears, vent brackets and ridge vent parts. Quoted against the frame schedule so the quantities match the members they join.
Steel sections, mill hallTianjin mill
Vent & roll-up hardware are specified by the member they connect, not by a generic size. Give us the tube or profile it grips and the load it carries, and the part follows. Where a drawing specifies a brand, we will quote the compatible equivalent and say so in writing.
What to put on the enquiry
- The member it connects: section, outside dimension and wall.
- Quantity per arch, per bay or per house — a total is enough if the house count is clear.
- Whether the fixing is a bolt, a self-drilling screw or a clip.
- Any coating requirement: galvanised, zinc-flake, or stainless for coastal sites.
| Line | Unit | Notes |
|---|---|---|
| Main connectors | pcs | Bore to match the tube OD or oval face |
| Secondary fixings | pcs | Screws, bolts, washers — specify grade |
| Spares allowance | % of main | 5 % on clips, 2 % on clamps |
| Sample bag | 1 set | Sent before first production run |
Exact item list depends on the drawing; the quotation itemises every line rather than a lump “fittings” sum.
Related
NEXT
Read next
Pages that answer the question this page raises.
- 04.06Fittings & connectorsGreenhouse frame fittings: arch clamps, gutter brackets, ground anchors, film clips, vent →
- 04.06.01Arch clamps & connectorsArch clamps & connectors for greenhouse frames — cast or formed clamps that join arch to g→
- 08.01Specify a frameHow to specify a greenhouse frame: span, bay, eaves, load case, covering, coating, fitting→
BUILD THE BOM
Send the frame schedule for vent & roll-up hardware
We return quantities per member, a spare allowance, and a sample bag offer before you commit to production.